41
Example: Entering geographical latitude and elevation:
Select menu item 1-20-1 (latitude) (press )).
In the example shown here, the most recently entered parameter was the value for
the acceleration of gravity (menu item 1-20-3). For this reason, the input fields
for menu items 1-20-1 and 1-20-2 are filled with 999…
In the example shown here, the geographical latitude of Goettingen, Germany,
was the value entered most recently. This value is the reference value, for which
no correction of the span adjustment was made with respect to the place of
installation, assuming that “151” (elevation in meters above sea level) has been
entered under menu item 1-20-2.
Enter the geographical latitude of the place of installation (or the reference
value 51.53) as a positive decimal number (convert angular minutes to decimal
places). Press ) to confirm your input.
– Select menu item 1-20-2 (“Elevation at the place of installation”) (key
sequence: ) k )).
The input field is filled with 999…, because the last value entered in menu line
1-20 was the acceleration of gravity (menu item 1-20-3).
display_999.eps
display_5153.eps
display_999.eps
To Next Page
Loading...
Need help?
General
