45
Instead of “ALTITUD” and “LATITUD”, “GRAVITY” is displayed for 2 seconds if the
acceleration of gravity (menu item 1-20-3) was entered rather than the elevation
and geographical latitude (menu items 1-20-1 and 1-20-2).
The value entered for the acceleration of gravity at the place of installation
is displayed (in m/s
-2
).
In the example shown here, the acceleration of gravity at Goettingen, Germany
(reference value) is shown.
This data is shown when menu item 8-12-2 is active.
– Press the ) key to confirm the displayed value.
– Place the prompted calibration weight on the scale (see page 25 for details on
calibration and adjustment).
display_gravity.eps
display_grav_981.eps
10Ib.eps
To Next Page
Loading...
Need help?
General
