Connecting a Barcode Scanner (Accessory, Order No. YBR02CISL)
t Disconnect the indicator from AC power (unplug the AC adapter)
For CAISL2 models:
t Connect the barcode scanner via PS/2.
For CAIS2 models:
t Please see “Pin Assignment Charts," page 13 (implemented via the YCC02-BR02
connecting cable or as option M8)
3
NOTE: This equipment has been tested and found to comply with the limits pur-
suant to part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
these instructions, may cause harmful interference to radio communications. For
information on the specific limits and class of this equipment, please refer to the
Declaration of Conformity. Depending on the particular class, you are either required
or requested to correct the interference. If you have a Class A digital device, you
need to comply with the FCC statement as follows: “Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.“
16 Operating Instructions Combics Indicators
Getting Started
To Next Page
Loading...
Need help?
General
