27
Example
Simple Weighing
Configuration: Factory settings
Step Key (or instruction) Display/Output
1. Turn on the scale e 0.000 kg
2. Zero the scale, if necessary ( 0.000 kg
(S symbol: scale is zeroed;
verified scales only)
3. Place container on scale + 0.015 kg
(in this case, 0.015 kg)
4. Tare the scale ) 0.000 kg
5. Place sample in container + 0.125 kg
(in this case, 0.125 kg)
6. Print values* p EISENMUELLER
GOETTINGEN
N + 0.125 kg
T + 0.015 kg
G# + 0.140 kg
* The Sartorius Service Center
or your Sartorius dealer can
configure the scale to include
2 customer-specific lines on the
printout. Software is available
for setting this configuration
with a PC.
To Next Page
Loading...
