Sartorius EB Series User Manual

89
Description
of the Keys
e key:
On/Off/Standby Switch
Switches the display on/
off. The scale remains
in standby mode.
( key: Zero
Sets the readout to zero.
The scale can only be
zeroed if the load is ±
2% of the maximum
capacity.
c key: Clear Function
This key is generally
used to interrupt/cancel
functions:
– Clear memory and
delete application
data
– Interrupt calibration/
adjustment routines
w key: Toggle
For toggling the display
between weighed and
calculated values
(counting result, percen-
tage, calculated result)
For changing the
reference sample
quantity or percentage
or number of subweighs
for averaging
v key:
Start Application
Program
The procedure that
follows after this key is
pressed depends on the
application program
selected; for a complete
description, see the
chapter entitled
“Operating the Scale”
in the corresponding
section.
) key: Tare
For taring the weight of
containers so that the
scale readout shows the
net weight of samples
p key:
Data Output
Press this key to output
the displayed values to
via the built-in interface
to a printer or
a computer.

Sartorius EB Series Specifications

General

Brand	Sartorius
Model	EB Series
Category	Scales
Language	English