40
Weighing in Percent
Purpose
With this application program you can obtain
weight readouts in percent which are in proportion
to a reference weight.
Available Features
– Reference percentage can be changed either in
the operating menu or during weighing
– Save the active weight value to have it loaded
as the preset reference percentage next time you
initialize this application
– Optional configuration for having the scale tared
automatically when the application is initialized
– Have the reference sample weight automatically
output to the data interface port when the
application is initialized, if the menu code for
“Printout with data ID codes” is set
– Press w to toggle the display between
percentage and weight
Factory Settings
Resolution: Standard resolution (3 2 1)
Reference percentage: 10 (3 3 2)
Preparation
Select the “Weighing in percent” application in the
operating menu:
$ Turn off the scale: Press e
● Turn on the scale: Press e; while all segments
are lit, press the ) key briefly
To Next Page
Loading...
