41
● Select the “Weighing in percent” menu item:
Press the ) p p keys, ) repeatedly
if needed, until
2 1 5 Weighing in percent without auto-tare or
2 1 11 Weighing in percent with auto-tare
is displayed
● Confirm selection: Press and hold the p key
> o indicates the selected item
● Select parameters for weighing in percent:
Press p
● Select and confirm:
– Reference percentage when the scale is turned on:
3 3 1 5 %
3 3 2 10 %
3 3 3 20 %
3 3 4 50 %
3 3 5 100 %
See also the “Scale Operating Menu (Overview)”
in the chapter entitled “Configuring the Scale”
● Save settings and exit the operating menu:
Press and hold the ) key
Additional Functions
In addition to the basic functions (power off,
zeroing, taring and printing), you can also access
the following functions from this application:
– Initialize application (v key)
– Clear initialization (c key)
– Change reference percentage after clearing
initialization (press and hold the w key)
– Display weight value (w key)
– Calibration/adjustment (press and hold the
) key)
To Next Page
Loading...
Need help?
General