94
C Marking
The C marking affixed to the equipment indicates that the equipment meets the
requirements of the following Directive(s):
Council Directive 89/336/EEC “Electromagnetic compatibility (EMC)”
Applicable European Standards:
Limitation of emissions:
EN 50081-1
Residential, commercial and light industry
EN 50081-2
Industrial environment
Defined immunity to interference:
EN 50082-1
Residential, commercial and light industry
EN 50082-2
Industrial environment
Important Note:
The operator shall be responsible for any modifications to Sartorius equipment
and for any connections of cables or equipment not supplied by Sartorius and
must check and, if necessary, correct these modifications and connections. On
request, Sartorius will provide information on the minimum operating
specifications (in accordance with the Standards listed above for defined
immunity to interference).
94/9/EC “Equipment or protective system intended for use in potentially
explosive atmospheres”
Applicable European Standards for Electrical apparatus for potentially
explosive atmospheres:
EN 50014 General requirements
EN 50018 Flameproof enclosure “d”
EN 50020 Intrinsic safety “i”
(see the EC Type-Approval Certificates, starting on the next page)
To Next Page
Loading...
Need help?
General