61
Factory Settings:
Transmission rate: 1200 baud (5 1 4)
Parity: Odd (5 2 3)
Stop bits: 1 stop bit (5 3 1)
Handshake:
Hardware, 1 character after CTS (5 4 3)
Operating mode: Standard SBI (5 5 1)
Print manually/automatically:
Manual after stability (6 1 2)
Preparation
● See the “Pin Assignment Chart” for details
Line Format (Data Output Format)
You can output the values displayed in the measured
value line and the weight unit with or without a data
ID code.
Example: Without data ID code
+ 253 pcs
Example: With data ID code
Qnt + 253 pcs
Configure this parameter in the operating menu
(Menu: Printout format 7 1 1 or 7 1 2 or 7 1 3).
The output without data ID code has 16 characters;
with data ID code, 22 characters.
! Note on Operation of the Scale with the
YDP03-0CE Printer
● When data output is configured for the 22-
character format (menu code 7 2 2), make sure
you configure the printer accordingly, by setting
the option for “GLP/GMP-compliant Printout”
to “Off” (-A1- 0 = off).
To Next Page
Loading...
