Sartorius EB Series User Manual

82
Menu 5. Interface 5.1. through 5.3. see previous page
5.2. Parity 5.2.1 Mark
5.2.2 Space
5.2.3 o Odd
5.2.4 Even
5.3. No. of stop bits 5.3.1 o 1 stop bit
5.3.2 2 stop bits
5.4. Handshake mode 5.4.1 Software
5.4.2 Hardware,
1 char. after CTS
5.4.3 o Hardware,
2 char. after CTS
5.5. Communication 5.5.1 o PC, YDP03 printer (SBI)
mode 5.5.2 YDP01IS printer*
6. Print for 6.1. Manual/auto 6.1.1 Manual without stability
weighing print mode 6.1.2 o Manual after stability
6.1.3 Automatic without stability
6.1.4 Automatic at stability
7. Print for 7.1. Printout format 7.1.1 No data ID codes
application 7.1.2 With data ID codes
7.1.3 o With data ID codes,
N, T and G-values and
2 header lines
8. Extra 8.1. Menu 8.1.1 o Parameter settings
functions alterable
8.1.2 Parameter settings
read only
8.2. External switch 8.2.3 w key function
function 8.2.4 o p key function
8.2.5 ( key function
8.2.6 c key function
8.2.7 v key function
8.2.8 ) key function
8.3. Power-on mode 8.3.1 Off/on
8.3.2 o Stand-by/on
9. Reset menu 9.– 1Factory settings 9.– 1 Reset
9.– 2 o Do not reset
* Make sure you set menu code 5 1 7, “9600 baud,” when using this printer.
Menu level 1
Menu level 2
Menu level 3
Factory setting
Menu item

Sartorius EB Series Specifications

General

Brand	Sartorius
Model	EB Series
Category	Scales
Language	English