86
Safety Inspection
If there is any indication that safe
operation of the scale with the AC
adapter or power supply is no longer
warranted:
§ Disconnect from AC power:
unplug the AC adapter/power
supply from the wall outlet (mains
supply)
> Lock the equipment in a secure
place to ensure that it cannot be
used for the time being
Safe operation of the scale with the
AC adapter or power supply is no
longer ensured when:
– there is visible damage to the AC
adapter/power supply
– the AC adapter/power supply no
longer functions properly
– The AC adapter/power supply
has been stored for a relatively
long period under unfavorable
conditions
– the equipment has been exposed
to rough handling during shipment
In this case, notify your nearest
Sartorius Service Center or the Interna-
tional Technical Support Unit based in
Goettingen, Germany. Maintenance
and repair work may only be
performed by service technicians who
are authorized by Sartorius and who
– have access to the required service
and maintenance manuals
– have attended the relevant service
training courses
! The seals affixed to this equipment
indicate that only authorized
service technicians are allowed to
open the equipment and perform
maintenance work so that safe and
trouble-free operation of the
equipment is ensured and the
warranty remains in effect.
To Next Page
Loading...
Need help?
General