Getting Started
Balance with Draft Shield
t Remove the packages (containing draft shield panels, weighing pan, pan
support, AC adapter, etc�) from the lower packaging and place them to one
side�
t Use both hands to lift the balance out of the packaging�
3
Exercise caution to avoid glass breakage�
Never lift the equipment by the draft shield panels to remove it from the
packaging�
t Place the balance on an even surface�
Balance with No Draft Shield
t Use both hands to remove the model without a draft shield from the
packaging�
t Remove the AC adapter and the balance parts from the packaging�
10 Cubis MSE Operating Instructions
To Next Page
Loading...