Technical Specifications
Cubis MSE Operating Instructions 87
Technical Specifications
General Data
Sartorius power supply 6971987
Primary 100 – 240 V~, –15%/+10%, 50 – 60 Hz, 1�0 A
Secondary 15 V, ± 5%, 2�66 A (max�), protected electronically against short circuit
Other data Protection class II as per EN/IEC 60950-1 | up to 3000 m above sea level |
IP40 as per EN 60529/IEC 60529
Power supply cable Two-sided plug with a 3-pin country-specific power plug and 3-pin socket
(IEC/EN60320-1/C14) for connection to the power supply
Other data See the power supply label
Balance
Power supply Only via Sartorius adaptor 6971987
Input voltage 15 VDC, ± 5%
Power consumption 7 W (max�)
Environmental conditions
Environment For indoor use only
Ambient temperature:
Storage and shipping -10 °C ��� +60 °C
Ambient temperature: Operation* +5 °C ��� +40 °C
Elevation 2000 m above sea level
Highest relative humidity** 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity for 40°C
Safety of electrical equipment According to EN 61010-1:2010
Safety requirements for electrical equipment for measurement, control, and labora-
tory use - Part 1: general requirements
Electromagnetic compatibility According to EN 61326-1:2013
Electrical equipment for measurement, control, and laboratory use -
EMC requirements - Part 1: general requirements
Defined immunity to interference: Suitable for use in industrial areas
Interference emission: Class B (suitable for use in residential areas and areas that are connected to a low
voltage network that also supplies residential buildings)�
Standard equipment
Selectable weight units
1
) Grams, Kilograms, Carats, Pounds, ounces, troy ounces, Hong Kong tael,
Singapore tael, Taiwanese tael, grains, pennyweights, milligrams,
parts per pound, Chinese tael, mommes, Austrian carats, tola, baht and mesghal
Available application programs Changing unit, counting, weighing in percent, calculation, averaging (animal
weighing), density determination, totalizing, net-total formulation
CE model balances verified for use in legal metrology comply with the requirements of Council Directive No� 2014/31/EU
with EN 45501:2015 and OIML R76:2006�
* For -�CE model balances/scales verified for use in legal metrology, refer to the information on the balance/scale�
** For -�CE model balances/scales verified for use in legal metrology, the legal regulations apply�
1
) Depending on the country-specific model version, not all weight units listed may be available�
To Next Page
Loading...
Need help?
General