Cubis MSE Operating Instructions 109
Accessories (Options)
Pipette Calibration Hardware and Software
Pipette calibration kit (hardware) for models with 0�1 mg and 0�01 mg readability
Consists of moisture trap and all required adapters
YCP04MS
Pipette calibration kit (hardware) for microbalance weighing modules 6�6S and 3�6P
Consists of moisture trap and all required adapters
VF988
Pipette Tracker pipette calibration software� Software and user manual in English only� YCP04-PT
Pipette Tracker Pro pipette calibration software, for use in regulated areas, networkable and validatable,
according to the 21 CFR Part 11 regulations� Software and user manual in English only�
YCP04-PTPro
Documentation basis for validation (IQ, OQ) of Pipette Tracker PRO version�
All documents are in English only�
YCP04-VTK
Filter Weighing and Antistatic Accessories
Antistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0�1 mg or 0�01 mg YWP01MS
Filter weighing pan d 75 mm, for ultramicrobalance or microbalance models
(weighing modules 6�6S, 2�7S; only together with DF draft shield)
VF2562
Filter weighing pan d 90 mm, for ultramicrobalance or microbalance models
(weighing modules 6�6S, 2�7S; only together with DF draft shield)
VF2880
Ionization blower to eliminate electrostatic charges on sample containers and samples YIB01-DR
Stat-Pen ionization probe for discharging electrostatically charged samples and filters YSTP01
Special Applications
Density determination kit for solids and liquids for weighing modules with a readability of
< 1 mg
YDK01MS
Density determination kit for solids and liquids for weighing modules with a readability of 1 mg
YDK02MS
Q-Grip, flexible holder for weigh-in containers and filters up to 120 mm diameter
(replaces the original weighing pan;
for Cubis
®
models with 0�01 and 0�1 mg readability)
YFH01MS
Q-Grid grid weighing pan for Cubis
®
models with a readability of 10 mg or 100 mg for weighing in
laboratory hoods, safety weighing cabinets or workbenches (reduced wind attack surface of the weighing pan;
replaces the standard weighing pan)
YWP03MS
Weighing Tables
Weighing table made from synthetic stone, with vibration dampening YWT03
Wall console YWT04
Weighing table made from wood with synthetic stone for precise, reliable measurements YWT09
Weighing Accessories
Weighing scoop made from chrome nickel steel, 90 + 32 + 8 mm 641214
Aluminum weighing scoop, 4�5 mg (250 pieces) for ultramicrobalance and microbalance models 6565-250
Aluminum weighing scoop, 52 mg (50 pieces) for ultramicrobalance and microbalance models 6566-50
Support arm for 10 | 100 mg precision weighing modules for raising MSE, MSU, and MSA display and control units YDH01MS
Support arm for modules with a weighing range of 20 kg or more for raising the operating unit YDHo2MS
The brand name and logo for Bluetooth
®
wireless technology are the property of Bluetooth SIG Inc� The use of this brand name and
trademark by Sartorius AG is under license� Other brand names and trademarks are the property of their respective owners�
To Next Page
Loading...
Need help?
General