Cubis MSE Operating Instructions 49
Application Programs
Example: Counting parts of equal weight
Parameter settings: Applic. - Count.
Step Press key Display/Printout
1� Place the parts container +22.6 g
on the balance
2� Tare the balance J 0.0 g
3� Place the reference sample quantity in the container
(in this example: 20 units)
4� Changing the Reference Sample Quantity S ref10
pcs
5� Select the reference sample quantity: Repeatedly press S
In increments of one (1, 2, 3, ���, 100) briefly or
In increments of ten (1, 10, 20, ���, 100) hold the S key ref20
pcs
6� Confirm selected reference sample quantity V + 20
pcs
and start the application�
The current reference weight remains saved nRef 20 pcs
until a new reference is set� wRef 1.07 g
7� Add desired number of pieces +500
pcs
8� If desired, print the results P Qnt + 500 pcs
9� Toggle display between average piece + 1.07 g G
weight, weight and quantity + 535.0 g
Repeatedly press S +500
pcs
10� Unload the balance – 21
pcs
11� Repeat as needed, starting from Step 7
12� Delete the reference value F 0.0 g
To Next Page
Loading...
Need help?
General