12
Service Manual Signum
Description of the Equipment
PW_Folie01.epsPW_Folie02.epsPW_Folie03.eps
c Clear Function
e On/off
(in standby mode,
Off is displayed).
Signum 2 and 3 only:
n If a second weighing platform is connec-
ted, this key toggles the display between
the two readouts.
( – Zero the scale
– Cancel calibration/adjustment
) – Tare the scale
k Toggle between 1st and 2nd weight unit,
or gross and net values, or normal and
10-fold higher resolution, depending on
operating menu settings (depends on
model)
J Start calibration or adjustment
p – To print: press briefly.
– To print GMP footer:
Press and hold (> 2 seconds)
Signum 3 only:
I To toggle the scale to Info mode
Signum 3 only:
d Identifiertaste zur Eingabe von Bediener-
kennungen
Signum 2 and 3 only:
K Toggle unit between normal and
10-fold higher resolution
Signum 2 and 3 only:
L Netto-Bruttowert-Taste
Nur Signum 2 und 3
w Toggle between display modes within an
application program
Signum 2 and 3 only:
r Lets you modify reference values
Signum 2 and 3 only:
O Saves a value or starts an application
program.
Signum 3 only:
R Saves a value in product data memory
Signum 3 only:
D Toggle applications
Signum 2 and 3 only:
I Press to view either application data or
manual tare values, depending on the
key pressed subsequently (e.g., ))
Signum 2 and 3 only:
c – Quit an application or delete an input
character
To Next Page
Loading...
