WARNING
In order to avoid any operational problems with the control panel, it is recommended that you
read carefully this manual before you start using the equipment.
Making any construction changes or unauthorized repairs is forbidden. This applies, in
particular, to modification of assemblies and components. Maintenance or repair operations
should be performed by authorized personnel (i.e. the installer or factory service).
The control panel can only work with analog subscriber lines. Connecting the telephone
circuit directly to a digital network (e.g. ISDN) will result in damage to the equipment.
If the analog telephone network is to be replaced by the digital one, please consult the
installer of your security system.
Pay special attention if the telephone line used by the control panel is frequently busy and/or
failures are reported concerning the line and/or monitoring. Report such situations to the
alarm system installer immediately.
CAUTION!
The alarm system is fitted with a battery which contains lead. After expiry of its service, the
battery must not be thrown away, but disposed of as required by the existing regulations
(European Union Directives 91/157/EEC and 93/86/EEC).
Latest EC declaration of conformity and product approval certificates can
be downloaded from web site www.satel.pl
DEFINITIONS OF SOME TECHNICAL TERMS AS USED IN THIS MANUAL:
• Service mode – the control panel condition which permits calling of the service functions
and programming of the security system parameters.
• User function mode – the control panel condition which permits performing the user code
protected functions (which are described herein).
To Next Page
Loading...
