SatLab SL600 - Battery

www.satlabgps.com
12
2.3.1.1. Baery
Satlab SL600 uses two hot swappable Li-Ion baeries 7.4V, 5000 mAh. When the receiver is powered
on, it acvates one of the baeries. It acvates to second one in case of any power loss in the rst
baery without interrupng the operaon.
In the standard package, there are two baeries included in the kit. Two baeries would provide a
connuous operaon of 16 to 24 hours depending on the operaon mode.
On each baery, there are four recesses, making sure that baery is placed correctly in the
compartment and also proving a locking mechanism so baery does not drop even if the baery cover
is open.
Placing baery in the receiver is depicted in the gure 2.5. Recesses on the baery guide to place and
lock the baery in the compartment.
Figure 2.4 Satlab SL600 baery.
2. Receiver Physical Appearance
Figure 2.5 Placing baery in Satlab SL600