SatLab SL600 - Page 29

www.satlabgps.com
29
3. Operaon
Satlab SL600 consists of
- System Board/Computer, controlling the whole operaon by seng trac rules among
communicaon ports, GNSS Receiver and Telemetry Medium.
- GNSS Receiver, tracking satellites, outpung raw observaon data and running RTK algorithm
- Telemetry Medium, UHF Radio or 3G modem, transferring correcons from/to GNSS Receiver
Telemetry Medium is set to either UHF Radio or 3G modem by Telemetry Mode. In order to access to
either of telemetry medium and make changes is only possible by acvang them.
Consequently UHF mode shall be acvated in order to make any changes.
Please refer to local authories for the UHF Radio parameters.