Two-Dimensional Bar Codes
Data Matrix, Print Data
Command Structure <ESC>DCxx...x
xx...x= Data, maximum of 500 characters
Example: <ESC>DC00006000
Placement: Immediately following the <ESC>BC Data Format
designation command or the <ESC>FX Sequential
Numbering command.
Default: None
Command Function To print a Data Matrix two-dimensional bar code image on a label.
Printer Input
<ESC>A
<ESC>%0<ESC>V0100<ESC>H0100<ESC>BX05051010000000001
<ESC>DCDATA MATRIX DATA MATRIX
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1. If an <ESC>BX Data Format designation command contains any
parameters out of the valid range, no symbol will be printed when
this command is sent.
Section 4. Programming Reference
Page 4-749001069A SATOCTSeriesPrinters
To Next Page
Loading...
