SATO SA408 - 4 Communications; Interfaces and Requirements; USB Interface Requirements; Serial (RS-232) Interface Requirements

41
SA408 - User’s Manual
4. Communications
Interfaces and Requirements
SATO SA408 printers come with a nine-pin Electronics Industries
Association (EIA) RS-232 serial data interface, a USB interface,
Parallel. A variety of interface options are suitable for versatile
applications:
SA408: Parallel, USB, and Serial interfaces
USB Interface Requirements
The Universal Serial Bus (USB) interface is compatible with your
existing PC hardware. The USB’s “plug and play” design makes
installation easy. Multiple printers can share a single USB
port/hub.
Serial (RS-232) Interface Requirements
The required cable must have a nine-pin "D" type male
Note:
1. You must insert the power supply’s barrel connector into the
power jack on the back of the printer before connecting
communication cables.
2. This printer complies with FCC Rules and Regulations, Part 15,
for Class A Equipment, for use with fully shielded six-foot data
cables. Use of longer cables or unshielded cables may increase
radiated emissions above Class A limits.