SATO SA408 - 6 Product Specification; General Specification

49
SA408 - User’s Manual
6. Product Specification
General Specification
Specifications
SA408
Printing Method
Direct Thermal / Thermal Transfer
Printing
Resolution
203 dpi(8 dots/mm)
Printing Speed
2~4ips (50.8~101.6mm/s)
Printing Length
Max 100”(2540mm)
Min 0.2”(5mm)
Printing Width
Max 4.1”(104mm)
Memory
8MB DRAM (5MB user available)
4MB Flash ROM (2MB user available)
CPU Type
32 bit RISC microprocessor
Sensors
Media Reflective sensor x 1 (movable) &
Media Transmissive sensor x 1 (Center fixed) /
Head open switch /
Ribbon end sensor
Operation
Interface
LED indicator (Power/Ready)x 2, Button(Feed) x 1
Communication
Interface
Parallel, RS-232(Baud rate: 2400~115200 bps),
USB
Software -
Label editing
Seagull Driver
Software –
Utility
Printer Utility, Font Utility
Media Type
Roll-feed, die-cut, continuous, fan-fold, tags,
ticket in thermal paper or plain paper and fabric
label
Media
Max Width:4.33”(110mm) Min Width:1”(25.4mm)
Thickness:0.0025”~0.01”(0.0635~0.254mm)
Max roll capacity(OD):5”(127mm)
Core size:1”(25.4mm) / Max roll
capacity(OD):4.5”(114.3mm)
Core size:0.5”(12.7mm) (optional) /
Max roll capacity(OD):4.72”(120mm)
Core size:1.5”(38.1mm) (optional)