SATO SA408 - Communicating with the Printer; Installing a Plug and Play Printer Driver (for USB Only)

43
SA408 - User’s Manual
Communicating with the Printer
The bundled printer driver can be applied to all applications under
Windows XP/ Vista/ Windows 7/ Windows 8, supporting 32-bit/
64-bit operation systems. With this driver you can operate any
popular Windows software applications including label editing
software or MS Word, etc., to print to this printer.
The following installation steps are based on Windows XP; steps
in other versions of operation systems are similar. Drivers can be
installed via the DVD included in printer package.
Installing a Plug and Play printer driver (for USB only)
1. Turn off the printer. Plug the power cable into the power
socket on the wall, and then connect the other end of the
cable to printer's power socket. Connect the USB cable to the
USB port on the printer and on the PC.
Note:
We strongly recommend that you use the Seagull Driver Wizard
instead of the Microsoft Windows Add Printer Wizard when
installing and updating your Drivers by Seagull.
(Even though the "Add Printer Wizard" is from Microsoft, it too
easily performs a number of tasks incorrectly when updating
existing drivers. It also badly handles the situation where a printer
driver is already in use by a Windows application.)