45
SA408 - User’s Manual
9. After driver installation is complete, click "Close".
The driver should now be installed.
Installing a Printer Driver (for other interfaces except USB)
1. Turn off the printer. Plug the power cable into the power
socket on the wall, and then connect the other end of the
cable to printer's power socket. Connect the Parallel cable or
Serial cable to the proper port on the printer and on your
computer.
2. Prepare the documentation and software DVD from printer
package and then install to DVD drive of your computer. The
DVD will bring out the following prompt. Click “Go”:
3. Under SA408 product selection prompt, choose Seagull
Driver version and then start installation:
Instead of the flash prompt above, another way to install
Seagull driver is to run the DriverWizard utility from the
Installation Directory where the Seagull driver files are located.
4. On the prompt, Windows Printer Driver, select “I accept…”
and click "Next".
5. Assign the directory to keep Seagull driver, (for example:
C:\Seagull) and click "Next".
To Next Page
Loading...
