44
SA408 - User’s Manual
2. Turn on the printer. If the printer supports Plug-and-Play, and
you have successfully connected it using a USB cable, then
the Windows Add Hardware Wizard will automatically detect
the printer and display a dialog that allows you to install a
driver. Click Cancel and do not install the driver using this
wizard.
3. Prepare the documentation and software DVD from printer
package and then install to DVD drive of your computer. The
DVD will bring out the following prompt. Click “Go”:
4. Under SA408 product selection prompt, choose Seagull
Driver version and then start installation:
Instead of the flash prompt above, another way to install
Seagull driver is to run the DriverWizard utility from the
Installation Directory where the Seagull driver files are located.
5. On the Seagull Driver Wizard prompt, select the first radio
button to “Install a driver for a Plug and Play printer”:
Then click “Next.”
6. Enter Printer name (i.e. SA408) and select "do not share this
printer”, and click "Next"
7. Check all the data on the showing screen, if it is correct, click
"Finish".
8. After the related files have been copied to your system, click
"Finish".
To Next Page
Loading...
