SATO WS408DT - Appendix A: DIP Switch

122
Appendix
A
DIP
switch
Appendix A: DIP Switch
DIP Switch Description Description Default
1
Switch between the
firmware mode and
Atmel mode.
ON: Firmware mode. It
boots your printer from
the flash memory.
OFF: Atmel mode. It
boots your printer from
CPU ROM.
Important In Atmel
mode, DIP 2 (watchdog)
must be set to OFF.
ON
2 Enable or disable the
watchdog.
ON: Enable watchdog
OFF: Disable watchdog
ON
3 Reserved. N/A OFF
4 Reserved. N/A OFF
5 Reserved. N/A OFF
6 Reserved. N/A OFF
7 Select your printer
type. It needs to be
used with DIP 8.
DIP 7 <ON>, DIP 8 <ON>
Printer Type: For
developers to debug
Depending on
your printer type
DIP 7 <ON>, DIP 8 <OFF>
Printer Type: DT Reserve
DIP 7 <OFF>, DIP 8 <ON>
Printer Type: DT global
DIP 7 <OFF>, DIP 8
<OFF>
Printer Type: TT global
8 Select your printer
type. It needs to be
used with DIP 7.
Depending on
your printer type