CUTTER ERROR The cutter is experiencing issues.
NO PAPER The label has run out.
HEAD OPEN
ERROR
Attempt to feed or issue the label with the top cover (head)
open.
HEAD ERROR A broken pin has been found on the thermal head.
EXCESS HEAD
TEMP
NO PAPER (Last
label has been
issued)
MEMORY WRITE
ERROR
FORMAT ERROR
MEMORY FULL
SAVING
The thermal head temperature has become excessively high.
The last label has been issued properly and the label has run
out.
An error has occurred while writing data into the flash ROM
or USB memory.
An erase error has occurred in formatting the flash ROM or
USB memory.
Saving failed because of the insufficient capacity of the flash
ROM or USB memory.
In font or PC command save mode. (to flash ROM or to USB
memory)
The flash ROM or USB memory is being initialized.
SAVING ERROR An EEPROM for backup cannot be read or written properly.
UPDATING
FIRMWARE NOW
BLUETOOTH
ERROR
WIRELESSLAN
ERROR
UPDATING
FIRMWARE ERROR
The printer is updating firmware.
Bluetooth initialization error.
Bluetooth setting parameter error.
WirelessLAN initialization error.
WirelessLAN setting parameter error.
An error occurred during the firmware update.
UNKNOWN
The status is unknown.
4.2.3 Navigation pane
The Navigation pane includes four items: Parameter Setting, Download, Tool and
Font. Each item has its own tabs, and each tab has a Send, Get, Add or Delete
Description
To Next Page
Loading...
