SATO WS408DT - 3 Printer operation; 3.1 Media sensor calibration

WS4-DT-r01-30-12-16TM
29
3
System
Mode
Self
-
Test
and
Dump
mode
If your printer has a Wireless LAN module, your SBPL configuration label will
contain the following entries:
1.
FW Version and Date
Wireless LAN card firmware version and date.
2.
IP Address
The IP address of your printer. When DHCP is enabled, it shows the automatically
assigned IP address; when DHCP is disabled, it shows the manually specified IP
address.
3.
Subnet Mask
The manually specified IPv4 subnet mask of your printer.
4.
Gateway
The gateway of your printer. When DHCP is enabled, it shows the automatically
assigned gateway; when DHCP is disabled, it shows the manually specified
gateway.
5.
MAC Address
The unique address assigned to your printer that connects to the internet.
6.
DHCP
When DHCP is enabled, it assigns an IP address to your printer automatically.
7.
DHCP Hostname
It is the name of a DHCP client
8.
Socket Port
The socket number of your printer.