■
USB
It shows the USB information in the
Port Name and Port Information
as
soon as the computer detects your
printer. By default, the
computer
automatically detects the USB port.
You can select the
printer you want
if your computer
is connected to
multiple printers
via USB. Click Search to search the hot-plugging USB printer.
■
COM
It is the serial port and related to the COM
tab in Parameter Setting. The settings of the
COM port need to be the same as those in
the COM tab, except for Port Name, which
lets you select the COM port you want if your
computer is connected to multiple printers
via COM. If you want to reset all of COM
settings, click Default.
■
LAN
It is the Ethernet port and related to the LAN
tab in Parameter Setting. It supports IPv4
and IPv6 addresses. For more information
about Setting up a network connection, see
Set up LAN connection, Set up IPv6
To Next Page
Loading...
