Property Name Description
manually.
Host Name It is the name of a DHCP client. The host name
allows up to 32 alphanumeric characters. You can
leave it blank or type a name you want. By
default, there is no host name.
Client ID It is an arbitrary value sent to the DHCP server to
reserve an IP address for your printer. Client ID
allows up to 32 hexadecimal characters. If you
leave it blank, your printer automatically assigns
“FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF” as the
client ID.
Trap 1 Trap is a message type of SNMP. When Trap 1 is
enabled and its IP address is set correctly, your
printer alerts the computer of the specified IP
address as your printer is experiencing problems.
Trap 2 Same as Trap 1.
To Next Page
Loading...
