SATO WS408DT - 1.4 Printer LED Indicators DT model

1 Introduction Printer indicators
WS4-DT/TT-r01-12.1.17-OM-RS
8
1.4 Printer LED Indicators DT model
Status lights help you check printer’s condition. The following tables show
the blinking speed of status lights and the conditions they indicate.
Symbol
Blinking Speed
Blinking Interval
**
Fast
0.5 Second
*
Slow
2 Seconds
* LED2 + *LED1
Slow
LED2 & LED1 Blinking Interval at same time
* LED2 + LED1 *
Slow
LED2 & LED1 Blinking Interval at different
timing
LED 2
LED 1
Description
LED
indicate
Label
Green
Green
The printer is ready to print.
V
Green
** Green
The printer is transmitting data.
* Green
* Green
In pause.
V
* Green
Green *
The printer is writing data to the flash or USB memory.
The USB memory is being initialized.
Green
Orange
Head high temperature.
V
Green
* Orange
The RTC battery is low. (If the printer has a built-in RTC)
Green
** Orange
The print module is opened when the printer is turned on.
Orange
Orange
Paper jam.
V
**Orange
** Orange
The media is out when the print data is sent to the printer.
Paper end.
V
**Orange
Orange **
Ribbon end or ribbon error. (for thermal transfer models only)
V
Red
ž Orange
The printhead is broken.
V
Red
ž *Orange
Communication error (RS-232C).
V
Red
**Orange
Cutter error (with optional cutter).
V
Red
Red
Cover (Thermal Head) open error during printing.
V
Red
* Red
An EEPROM for backup cannot be read or written properly.
A command has been fetched from an odd address.
Word data has been accessed from a place other than the
boundary of the word data.
Long word data has been accessed from a place other than
the boundary of the long word data.