SATO WS408DT - 5.1.2 Media housing; 5.1.3 Label Sensor

5. Maintenance
WS4-DT/TT-r01-12.1.17-OM-RS
35
5.1.2 Media housing
Use a soft cloth to clean the dust, dirt or debris built up on the Media Roll Holders,
Media Guides and media path.
1. Moisten a soft cloth with ethyl alcohol or use a SATO cleaning wipe.
2. Wipe the Media Roll Holders to clean dust.
3. Wipe the Media Guides to clean dust and dirt.
4. Wipe the media path to clean paper debris.
5.1.3 Label Sensor
Media sensors may not be able to detect the media correctly if they become dirty.
1. Moisten a soft cloth or a cotton swab with ethyl alcohol or use a SATO cleaning
wipe.
2. Gently brush sensors to remove the dust away.
3. Use a dry cloth to clean the residue.