Configuration and Interface set up
WS4-DT/TT-r01-12.1.17-OM-RS
60
8.1 IPv6
The IPv6 tab provides IPv6 settings, including IPv6 and Current IPv6.
Set up IPv6 connection
Before you set up IPv6, make sure your have IPv6 connectivity.
1. Do one of the following to configure your IPv6 settings:
• If you have a static IPv6 address, in the Mode list, click MANUAL; in the
IP Address box, enter your IPv6 address, and click Send.
• If you don’t have a static IPv6 address, in the Mode list, click DHCPv6;
in the Address Type list, click Normal, and click Send.
To Next Page
Loading...
