12 Safety precautions
WS4-DT/TT-r01-12.1.17-OM-RS
85
When unplugging the power cord from the outlet, be sure
to hold it by the plug. Pulling it by the cord could expose or
break the core wires and cause a fire or electric shock.
The power cord set that comes with the printer is
especially made for this printer. Do not use it with any
other electrical devices.
Be careful not to get your fingers pinched when opening or
closing the top cover. Also be careful the top cover does
not slip off and drop.
When loading media roll, be careful not to get your fingers
pinched between the media roll and the supply unit.
When not using the printer for a long time
When not using the printer for a long time, unplug the
power cord from the outlet to maintain safety.
During maintenance and cleaning
When maintaining and cleaning the printer, unplug the
power cord from the outlet to maintain safety.
To Previous Page
Loading...
