12
©
Scania CV AB 1997-05:2 01:01-02
Program 96
Machining
Machining dimensions and oversize valve seat
rings, see Specifications.
1. Check that the contact surface and magnetic
foot are smooth and clean. Clean valve bush-
ings.
2. Select the largest spindle which easily goes
into the valve guide.
Fit the guide spindle and turn the feed screw
to its upper position.
3. Select and fit cutter.
4. Undo the speed lock and move the pivot plate
to the upper position using the adjusting
screw.
To Next Page
Loading...
