Scania 9-Series - Flywheel and housing specifications

01:01-02
©
Scania CV AB 1997 69
Program 96
Flywheel housing
Seal in flywheel housing: Dimension B, page 43 ............... 7mm
Tightening torques
Flywheelbolts.......................................... 180Nm
Bolts for flywheel housing ................................ 90Nm
Timing gear
Camshaft gear
Heated to 100 °C before fitting.
Backlashagainstintermediategear.......................... 0.03 - 0.18 mm
Injection pump gear
Backlashagainstintermediategear.......................... 0.03 - 0.16 mm
Intermediate gear
Axialclearancemax ..................................... 0.23 mm
Power take-off gear
Backlashagainstintermediategear.......................... 0.03 - 0.18 mm
Camshaft
Axialclearance ......................................... 0.15 - 0.30 mm