Sceptre E20 - Connections

- 16 -
www.SCEPTRE.com
SCEPTRE E20 Display User Manual
Connections
If You have HDMI Connection on Your Video Card…
1. Make sure the power of the E20 LED MONITOR is turned off.
2. Obtain a HDMI cable and connect one end to the back of the monitor and
the other end to the back of the computer.
3. Turn on the power of both the E20 LED MONITOR and the computer.
Please Note:
• The PC’s clearest picture is ran with 1600 x900 at 60 Hz.