Sceptre E20 - Disassembling the Stand for Wall Mounting

- 11 -
www.SCEPTRE.com
SCEPTRE E20 Display User Manual
Disassembling the Stand for Wall Mounting
1. To remove the stand, lay the monitor flat on a table. Unscrew the two screws
indicated and you can pull the stand completely off. If you want to wall mount the
monitor you will need to use the included spacers first on the mounting pattern
before you attach your mounting plate.
2. The display’s mountain pattern is 100mm by 100mm using M4 x 10mm size
screws.