- 10 -
www.SCEPTRE.com
SCEPTRE E20 Display User Manual
2. Lay the monitor flat on a surface and insert the neck + base assembly to the back
of the monitor. Secure the top of the neck by screwing in 2 screws.
3. To finalize your installation of the display, please read the following:
a. If you are placing the display on a stand, we would recommend you to
use a display safety strap (not included) in order to minimize the
possibility of the display toppling over.
b. If you are mounting the display on the wall
i. Make sure the wall is structurally safe for the weight of the display
ii. Make sure the wall mount kit is compatible with the display
c. Read and follow all instructions provided by the wall mounting kit.
d. Securely install all screws and connections.
To Next Page
Loading...
