Schaeffler Technologies
BA 68
33
Deactivate sensor
The sensor can also be deactivated again:
In the OPTIME app, navigate to sensor management, see page 53.
Tap the [
Deactivate sensor
] button.
Follow the instructions in the OPTIME app to activate the sensor
via NFC. Depending on the mobile device used, each separate
NFC contact is acknowledged, e.g. through vibration.
The sensor is deactivated.
If the sensors are handled incorrectly there can be a risk of leaks or
the emission of evaporated electrolyte that can cause a fire or explo-
sion and lead to serious injuries. Deactivate the sensor before hand-
ing it over for proper disposal. Sensors must also be deactivated
during transport and storage. Defective sensors must not be sent by
air freight.
Sensor mounting location
When installing the sensor at a monitored machine it is important to
take the position of the sensor and the contact between sensor and
machine into consideration, see page 21.
Risk of damage due to incorrect mounting. To ensure optimum
condition monitoring, you may wish to seek assistance from
a vibration expert for this step.
Schaeffler Monitoring Services GmbH can offer you a service ideally
tailored to your needs.
To Next Page
Loading...
