Ź Demount the foamer head parts.
Ź Place the parts and milk hose ±30 min
in a solution of 500 ml hot water and
25 ml cleaning product (Milkpure).
Ź Cl
ean all the parts in lukewarm running
water.
Ź
Refit the foamer head parts.
Ź Mount the foamer head at the outlet so
that it engages with a "click".
Ź
Select
and continue with step 6.
Option: Plug & Clean
Perform the specified cleaning steps once
a wee
k.
Option: Plug & Clean
Ź Select for machine cleaning.
Ź Push the milk hose adapter into the
"Plug&Clean" device.
Ź Select
.
Ź Follow the instructions on the touch
screen.
Ź Insert the cleaning tablet into the inlet
for ground coffee.
Ź Close the inlet.
Ź Select
.
; Cleaning runs and ends.
Ź Weekly foame
r head cleaning, see
step 4.
; The mixer rinse runs automatically.
Ź
Continue with step 6.
Outer surfaces and
containers
Ź Wipe down the outer surfaces of the
machine with a damp paper towel.
Depending on the option available, per-
form the following actions:
Ź Rin
se out the drinking water tank with
fresh water.
Ź Th
oroughly rinse out the milk container
with fresh water.
Ź Th
oroughly clean the waste water tank
and/or drip tray with a domestic clean-
ing product.
Ź S
elect for machine cleaning.
Ź Follow the instructions on the touch
screen.
Ź Insert the cleaning tablet into the inlet
for ground coffee.
Ź Close the inlet.
Ź Select
.
; Cleaning runs and ends.
Separate programmes
Foamer cleaning and mixer rinsing can be
performed separately.
Option 1: Foamer cleaning
Ź Pre
ss [Foamer cleaning] in the "Care"
menu.
Ź S
elect .
; Foamer cleaning starts.
Option 2: Mixer rinsing
Ź Pre
ss [Mixer rinsing] in the "Care"
menu.
Ź S
elect .
; Mixer rinsing starts.
Improper handling of beans, water, milk, powder or other coffee ingredients can lead to health prob-
To Next Page
Loading...
Need help?
General
