Programming www.schaerer.com
Topping quality / Foam quality
Coffee machines with a powder system have the "Topping quality" parameter, and coffee ma-
chines with fresh milk have the "Foam quality" parameter.
Display/ Display
text
Parameter description Setting range Notes
Topping quality Setting for the milk powder intensity.
► Touch the [Topping quality] field in the "Milk &
foam" menu.
The "Topping quality" window appears.
► Press and to set.
► Confirm with .
The new settings are active.
20 – 100 Reducing the value = lighter fla-
vour
Increasing the value = more inten-
sive flavour
Foam quality Setting for the milk foam quality.
► Touch the [Foam quality] field in the "Milk & foam"
menu.
The "Foam quality" window appears.
► Press and to set.
► Confirm with .
The new settings are active.
40 – 99 Reducing the value = finer foam
pores
Increasing the value = coarser
foam pores
Macchiato pause
Display/ Display
text
Parameter description Setting range Notes
Macchiato pause This parameter can be used to shorten or lengthen
the pause between milk dispensing and milk foam
dispensing for a latte macchiato.
► Touch the [Macchiato pause] in the "Milk & foam"
menu.
The "Macchiato pause" window appears.
► Press and to set.
► Confirm with .
The new settings are active.
1 – 20 The quality of a latte macchiato
generally improves when the pau-
se is extended.
"Timer programme" menu
In the "Timer programme" menu, the switching on and switching off times can be programmed.
► Touch the
field in the "Selection menu".
The "Timer programme" menu is displayed.
The menu contains the following subitems:
• Timer status
• Set timer
• Timer overview
• Clear timer
• Timer info
BA SCV_EN
V06 | 11.2015
65
To Next Page
Loading...
Need help?
General
