www.schaerer.com Programming
Display/ Display text Parameter description Setting
range
Notes
Warm rinsing field This parameter can be used to switch the warm active / inacti- For self-service mode, it is
rinsing field on and off in the main window. ve recommended that this
► Touch [Warm rinsing field].
Each press of the field switches the set-
ting between "active" and "inactive".
function be deactivated.
Otherwise, the operator
could possibly trigger a
warm rinse by mistake.
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
Main window with warm rinsing field
activated.
Barista field This parameter can be used to switch the Barista active / inacti- For self-service mode, it is
field on and off in the main window. ve recommended that this
► Touch [Barista field].
Each press of the field switches the set-
ting between "active" and "inactive".
function be deactivated.
The operator does not
have access to the functi-
on if it is used only once.
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
Main window with Barista field acti-
vated.
2nd level
Main window with activated 2nd lev-
el.
With this parameter, the 2nd level in the main
window can be switched on and off.
► Touch the [2nd level] field.
Each press of the field switches the set-
ting between "active" and "inactive".
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
active / inacti-
ve
–
Main window with deactivated 2nd
level.
ON/OFF button The ability to switch the machine on and off can
be controlled with this parameter. For direct swit-
ching on and off, the machine can be switched
on and off as usual. The "via PIN" function can
be used to require a PIN entry in order to switch
the machine on or off.
► Touch the [ON/OFF button] field.
directly / via
PIN
For self-service mode, it is
recommended that the
function "via PIN" be deac-
tivated. The prevents the
machine from being swit-
ched off by mistake.
Input window PIN with the variant
"via PIN" activated.
Each press of the field switches the set-
ting between "directly" and "via PIN".
The PIN from the "Cleaning" level will be re-
quested.
See "Programming" - "Menu, Access control
PIN".
BA SCV_EN
V06 | 11.2015
74
To Next Page
Loading...
Need help?
General
