www.scheppach.com
GB
|
21
Explanation of the symbols on the product
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace
proper accident prevention measures.
Before commissioning, read and observe the operating manual and safety instructions!
Wear hearing protection!
Wear respiratory protection!
Wear safety goggles!
Attention! Danger of injury! Do not reach into diamond cutting disc while it is running!
ATTENTION: Segmented diamond cutting discs must not be used!
Attention! Failure to observe the safety signs and warning information axed to the machine
and failure to observe the safety and operating instructions can result in serious injury or
even death.
Danger of cutting the diamond cutting disc!
Weight.
Protection class II (double insulation).
Transport protection.
Observe the direction of rotation of the engine and diamond cutting disc.
The product complies with the applicable European directives.
m Attention!
We have marked points in these operating instructions that impact your safety with this
symbol.
To Next Page
Loading...
