7 • Schlage • AD-400 user guide
Locks with card readers – Add construction access mode user credentials
Construction
access mode
credential type
Steps to add construction access mode user credentials
1 2 3 4 5
Normal use
construction
credential
Unlocks the lock
for relock delay
period
Present
master
construction
credential to
reader
Green LEDs
blink
Present user
credential
within 20
seconds
Green LEDs
blink and
credential is
added
Repeat steps
3 and 4 for
additional
credentials.
Credentials
added with
the master
construction
credential will
have 24/7
access.
Toggle
construction
credential
Changes the
state of the lock
from locked to
unlocked or vice
versa
Present
master
construction
credential to
reader
Green LEDs
blink
Press and
hold Schlage
button while
presenting
user credential
within 20
seconds
Green LEDs
blink 5 times,
2 beeps will
sound and
credential is
added
Cancel construction access mode
Do one of the following:
• Program the lock with the SUS. See the SUS user guide for more information.
• Reset the lock to factory settings. See Reset to factory default settings on page 10 for
more information.
When construction mode is cancelled, the master construction credential and all other
credentials added using the master construction credential will no longer function.
To Next Page
Loading...
