7 Press processes
SCHMIDT
®
PressControl 3000 – V1.3
35
Acknowledge the incorrect pressing. After that, you will be able to
continue the work.
As soon as the set number of pieces has been reached, an alarm sounds. If
you want to continue to produce, you need to reset the pre-selection counter
to zero.
Press the "PCT-0-" softkey.
Press the "PCToff" softkey when you want to switch the pre-selection
counter off.
You can lock this counter and prevent the pre-seletion counter from being
reset.
Select the "Data Input" system function key.
Select the "Counter access" parameter.
Enter the value "0".
Resetting
Incorrect pressing
Locking
To Next Page
Loading...