Schmidt PressControl 3000 User Manual

1 Safety
SCHMIDT
®
PressControl 3000 – V1.3
8
1.4 Safety devices
Figure 1-1: PressControl 3000
1 Operational status indicator 2 EMERGENCY STOP pushbutton
Operational status indicator
The operational status indicator is located on the display of the control unit.
The status indicator is lit in green permanently when the press system has
been switched on and is ready for operation.
Emergency Stop pushbutton
There is an EMERGENCY STOP pushbutton on the control panel of the
control unit.
 Press the Emergency Stop pushbutton immediately in case of
emergency.
The press system is taken to a safe operating state. All moving
machines are stopped immediately and the press system is
depressurised.
 Eliminate the error.
 Unlock the Emergency Stop pushbutton by turning and pulling it.
 Switch the press system on again at the control unit.
1
2
What to do in an
emergency
Start af
ter Emergency
Stop

Schmidt PressControl 3000 Specifications

General

Brand	Schmidt
Model	PressControl 3000
Category	Control Unit
Language	English