MAINTENANCE
XH1500/XH1000 06-24 Maintenance Section 5-17
MAINTENANCE
© 2024 Alamo Group Inc.
Shaft Installation
Check your driveline part number to insure the correct part is being installed. Installation of
improper components could cause drive components to fail causing machine damage, injury
or death. If you are unsure of the proper part number, contact your dealer for assistance.
Parts Information
Use of genuine Schulte replacement parts is your guarantee that parts are of the same quality and are
manufactured to the same standards as the original equipment. These parts are made and tested to Schulte
specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of "will fit"
parts may reduce the performance, void Schulte warranties, and present a safety hazard. Use genuine Schulte
parts for economy and safety.
(SPSI-2) str
SEE YOUR SCHULTE DEALER
Wing Shaft Installation
1. Unclip the splitter gearbox shield to access
the spline shafts.
2. For ease of future maintenance, spray penetrating oil in the shaft yokes, and coat the gearbox spine shafts
with grease.
To Next Page
Loading...