Assembly
05.00 | AGE-XY | Assembly and operating manual | en | 389007 13
4 Assembly
4.1 Mounting the AGE on the robot
Position of the item numbers }7 [/21]
Mounting the AGE on the robot
1 Robot with interface
according to DIN ISO 9409
2 Compensation unit AGE-XY
3 Allen key for assembly
1. Fasten the AGE to the robot interface with four mounting
screws (The screws are pre-mounted.)
2. The cylindrical pin (included in the accessory kit) can be used
to center the AGE.