Basic safety notes
05.00 | AGE-XY | Assembly and operating manual | en | 389007 7
2 Basic safety notes
2.1 Intended use
The product was designed to compensate a pocess-related
displacement in XY plane. A mechanical center locking using a
positive piston is included as a standard in the product. A
position storage via a pneumatic cylinder is optional available.
l
The product may only be used within the scope of its technical
data, }3 [/12].
l
When implementing and operating components in safety-
related parts of the control systems, the basic safety principles
in accordance with DIN EN ISO 13849-2 apply. The proven
safety principles in accordance with DIN EN ISO 13849-2 also
apply to categories 1, 2, 3 and 4.
l
The product is intended for installation in a machine/
automated system or for attachment to a robot. The
applicable guidelines for the machine/automated system must
be observed and complied with.
l
The product is intended for industrial and industry-oriented
use.
l
Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Not intended use
l
Any utilization that exceeds or differs from the appropriate
use is regarded as misuse.
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of
the product or damage it.
l
Structural changes should only be made with the written
approval of SCHUNK.
To Next Page
Loading...
Need help?
General
